FAQ’s

The right waterproofing product depends on your needs:

– Flex-E-Guard: Best for high-stress areas like patios or balconies.
– Waterproofing Liquid Rubber: Ideal for roofs and walls, offering UV stability.
– Masonry Waterproofing: Perfect for structural walls and water features like ponds.

Pro Tip: Evaluate the surface type and level of exposure to water before selecting a product.

1. Use Clean Tools: Dirty tools can contaminate your mix.
2. Measure Ratios Precisely: Follow mix proportions for consistency.
3. Add FibrePlast Fibres: Strengthen your mix and reduce shrinkage cracks.

DIY Tip: Gradually add water to avoid creating a mix that’s too runny.

– Brush or Roller: For even application of products like Flex-E-Guard or Liquid Rubber.
– Primer: Use SCC’s GripKey or GripBond to prep surfaces.
– Membrane: Reinforce high-stress areas with a waterproofing membrane.

– Clean the Surface: Remove debris, dust, and grease.
– Apply a Primer: Use GripKey to improve adhesion.
– Choose Your Waterproofing Product: Apply Liquid Rubber for UV stability or Masonry Waterproofing for a decorative finish.

1. Clean Materials: Use high-quality aggregates.
2. Use Additives: Incorporate FibrePlast Fibres for added durability.
3. Mix Gradually: Combine dry materials with water in stages.

1. Use bonding agents like GripKey for better adhesion.
2. Reinforce with FibrePlast Fibres to prevent cracking.
3. Apply thin, even layers of plaster.
4. Keep surfaces damp during curing.
5. Protect with a water-based concrete sealer.

1. Surface Prep: Clean and dry the surface.
2. Product Choice: Use Liquid Rubber for roofs or Flex-E-Guard for bathrooms.
3. Apply in Layers: Multiple coats ensure full coverage.
4. Reinforce Stress Points: Use membranes in joints and corners.
5. Test for Leaks: Perform a water test after drying.

– Use Sustainable Products: Choose FibrePlast Fibres to reduce waste.
– Recycle Materials: Reuse leftover supplies.
– Build for Durability: Use Flex-E-Guard to waterproof and protect surfaces for the long term.

– Small Cracks: Use Waterproof Crack Filler for minor imperfections.
– Larger Repairs: opt for GripRepair 10 FR for structural damage.
– Finish: Sand smooth and apply a concrete sealer for durability.

1. Clean the area thoroughly.
2. Apply GripRepair 1011 FC for a smooth, even repair.
3. Seal the surface with a concrete sealer for added protection.

– Waterproof Crack Filler: For minor cracks.
– GripRepair 10 FR: For heavy-duty repairs.
– Masonry Waterproofing: For decorative, waterproof finishes.

– Clean and Prime: Prepare the wall with GripKey.
– Apply Multi Coat: Choose from white, grey, or charcoal finishes.
– Seal It: Use a water-based concrete sealer to protect the surface.

– Prevents cracks by retaining moisture.
– Promotes strength by enabling proper hydration.
– Leaves a smooth, dust-free surface.

– Flex-E-Guard: Non-toxic and perfect for ponds.
– Masonry Waterproofing: For decorative water features.
– Multiple Coats: Apply at least two coats for complete coverage.

1. Use clean tools and high-quality materials.
2. Add FibrePlast Fibres to enhance strength and prevent cracks.
3. Mix in small batches to maintain consistency.

– Pouring: Use a screed to level the surface.
– Curing: Apply GripCure Acrylic to lock in moisture and prevent cracks.

– Add FibrePlast Fibres to the mix.
– Cure with GripCure Acrylic immediately after pouring.
– Keep the surface damp during curing.

Yes, both products can complement each other. Use SCC Masonry Waterproofing for structural or decorative waterproofing on masonry surfaces and SCC Waterproof Multi Coat for finishing and protecting floors or walls. Together, they create a fully waterproof and stylish surface.

Always prime your surfaces with SCC’s GripKey or GripBond before applying these coatings. Proper priming ensures better adhesion, resulting in a longer-lasting and crack-resistant finish.

Absolutely! Both products are UV-stable and resistant to weathering, making them suitable for outdoor applications like patios, balconies, and retaining walls.

Both products should be applied in thin, even coats—typically 1–2mm per layer. Applying two coats ensures optimal waterproofing and durability.

– SCC Masonry Waterproofing: Focuses on structural waterproofing and is ideal for masonry surfaces like retaining walls and water features.

– SCC Waterproof Multi Coat: Designed for seamless, decorative finishes on both walls and floors, combining waterproofing and style.

Pro Tip: Use SCCMasonry Waterproofing for the base layer and SCC Waterproof Multi Coat for a polished, decorative finish.

Yes, both products can be overcoated with compatible paints or sealers for added protection or to customise the colour.